HOME || ASK A QUESTION/OFFER FEEDBACK || CONTACT US || LINKS || SITE INDEX || STIRLINGLLOYD GROUP

Isothane Spray Foam Insulation


Introduction
Frequently Asked   Questions
 Technical Data
 Sheets
AGRISPRAY OS
DURATHERM OS
Bridge Infill Case Study
PIRTHANE ‘‘O’’
Soffit Insulation Case
   Study
TECHNITHERM
Wall Tie Replacement -
   Insulation Case Study
THERMADEK 40 LK
Digester Insulation Case
   Study

Thermadek Winter
   Grade

Winter Application
   Case Study 1
Winter Application
   Case Study 2

Pirthane O - A World First

Pirthane O insulates to Building Regulations and is easy to install.  It allows fast-track insulation on new and existing buildings.

Pirthane O has a Class O fire rating suitable for building interiors and gives effective condensation control whilst upgrading thermal efficiency.

TYPICAL APPLICATIONS

    Insulation of :-
  • Car Parks
  • Concrete Soffitts
  • Roof Internals
  • Air Plenums

ADVANTAGES

  • Class 0 to BS476 Parts 6 & 7.
  • Fast track application; half the installation time.
  • Excellent and permanent adhesion to all substrates, low maintenance costs.
  • Low thermal conductivity at reduced thicknesses; saving space.
  • Does not contain mineral fibres, zero air erosion, no health & safety problems.
  • Penetrations caused by post installation work (ceiling hangers, cable trays etc.) can easily be sealed and repaired.
  • The best fire properties of all spray applied foam insulation.
  • Installed only by Isothane approved & experienced contractors.

Thermal Insulation with Class 0 Fire Resistance Isothane Pirthane O provides an insulative barrier between building and car park below

FURTHER INFORMATION

Isothane can supply a range of product literature, technical specifications and generic details to support your information requirements.  You can request further information through our Requirements Form.