Ecofil 40
Ecofil 40 when used to fill buoys offers buoyancy and resistance to chemical and mechanical attack without degradation for many years
Technitherm
TECHNITHERM® is a totally CFC & HCFC FREE two-component, 1:1 mix ratio rigid polyurethane foam which complies with the requirements of BS 7457:1994 for the stabilisation and thermal insulation of masonry cavity walls. It is required that TECHNITHERM® is installed in accordance with BS 7456:1991 Code of Practice by approved installers trained by Isothane Ltd technical staff.
Pirthane® 0
PIRTHANE® ‘0’ is an insulating system with excellent fire resistant properties. It has a Class 1 surface spread of flame when tested to BS476 Part 7 1997; when tested to BS476 Part 6 1989 the material achieved a fire propagation index (I) of not more than 12 and subindex (i1) of not more than 6.
Thermadek
THERMADEK is an HCFC & CFC FREE two component, 1:1 ratio, rigid foam system which when processed through suitable spray machinery ( Graco, Gusmer, Glas-Craft ) will produce a rigid foam of approximate density 40kg/m³ with exceptionally good compressive strength and a very smooth surface. The system complies with British Standard Numbers 5241 and 7021 for external roof insulation and weatherproofing.
Isothane WBF
Isothane WBF is our KIWA approved (certificate BAR-18-048-P-A-UK) water blown open cell spray foam product. suitable for insulation purposes in a wide range of different properties across both the commercial and residential sectors, renovation or new build. Isothane WBF can be used to reduce air leakage as well as for sound deadening between floors.
Agrispray® OS
AGRISPRAY® OS is an HCFC AND CFC FREE two-component, 1:1 ratio, rigid foam system which when processed through suitable spray machinery (Graco, Gusmer, Glas-Craft) will produce rigid foam with exceptionally good compressive strength.
Duratherm ® OS
Duratherm ® OS is our KIWA approved spray foam product. Suitable for insulation purposes in a variety of different properties and structures, for roof stabilisation, to reduce air leakage, and to overcome issues with slipping tiles and nail fatigue.
Exo-Set
EXO-SET is a zero ODP two component foam system fully formulated to produce a high density rigid spray foam. The system should be processed at a 1:1 volume ratio through suitable spray machinery which will produce a closed celled rigid foam of approximately 220kg/m³ density. When fully cured the foam is extremely strong and durable, and is fire retardant in accordance with BS4735
Reprocell Range
The REPROCELL range are two component, 1:1 ratio, CFC & HCFC FREE closed-cell water blown rigid foam systems designed to produce a polyurethane foam with a fine cellular structure, low friability and good adhesion to substrates. When processed through suitable dispense machinery this system will produce a rigid foam with a range of densities, good compressive strength, cell structure and other physical properties.